This is a copy. Use Snipmill at snipmill.com.

Skip to content

Turn up a quiet recording, song or video, with a limiter that keeps the sound from crackling, or bring it to the loudness of where it will play.

Settings

Settings

What to doRaises or lowers it by dB
VolumeLouder, without clipping
SidesBoth sides stay
Your file stays on your device. It isn't uploaded. How we keep it private

Good to know

What the Volume Booster does to your audio

Only the sound's level changes; to do that, the sound is decoded and encoded again.

Level
What happens: "Change level": up or down by the dB you pick. "Even out": the whole file is measured first, then set to the loudness you pick
Peaks
What happens: A boost passes a limiter that holds the loudest moments about 1 dB under the top, so they are lowered a little instead of being cut flat (the crackle of clipping). Evened out, peaks stay under -1.5 dBTP. Turning a file down needs no limiter
Format
What happens: Your file's own: MP3 stays MP3, WAV, FLAC and OGG stay, M4A and AAC come out as M4A, Opus as OGG (Vorbis); other sound files become MP3. A video comes back as an MP4; a sound-only MP4 or WebM as M4A
Quality
What happens: MP3, M4A and a video's sound (AAC) at 192 kbps; WAV and FLAC are written without lossy compression
Sample rate
What happens: Your file's own, at most 48 kHz in MP3, M4A and video
Video picture
What happens: An H.264 or HEVC picture is copied as it is; other video (VP8, VP9, AV1, the MPEG-4 in many AVI files) is encoded again as H.264
Length, sides
What happens: Kept, unless you pick one side under "Sides": then that side plays on both
Other tracks
What happens: Only the first sound track is kept (and in a video, the picture); an MP3's cover picture is left out

Which setting to pick

Volume
Choices: −6 dB, +3 dB, +6 dB, +10 dB, +15 dB, +20 dB
When to use it: A file that is evenly too quiet or too loud. +10 dB sounds about 2× as loud, by the common rule of thumb. Background noise gets louder with the voice
Where it will play
Choices: Music sites (−14 LUFS), Podcasts (−16 LUFS), TV (−23 LUFS)
When to use it: Files that should sound as loud as others on the same app or channel, or several files that should match each other
Quiet and loud parts
Choices: As is, Closer
When to use it: Closer, for a voice that drops away or one speaker much louder than another: a gentle compressor lifts the quiet parts and the loudness range is narrowed to 7 LU (As is allows 11). Its effect can't be heard in the preview
Sides (stereo files; off for a mono file)
Choices: As is, Left only, Right only
When to use it: A mic plugged into one side, so the voice is in one ear only

Which loudness each place uses

LUFS measures how loud a file sounds over its whole length, by the ITU-R BS.1770 method. Apps play files at their own level, so a file set near it is neither turned down nor left quieter than the rest. The three choices under "Where it will play":

Music sites (−14 LUFS): Spotify's level
What the owner publishes: Spotify plays tracks at −14 LUFS by default and asks for peaks under −1 dB true peak
Podcasts (−16 LUFS)
What the owner publishes: Apple Podcasts asks for about −16 LKFS (the same scale), within 1 dB, with peaks under −1 dB
TV (−23 LUFS)
What the owner publishes: EBU R 128, the European broadcast recommendation: −23 LUFS

What people make louder

  • A 50-minute lecture recorded from the back of the room, as MP3: Even out for Podcasts (−16 LUFS) with quiet and loud parts Closer, so questions from the room come up closer to the speaker's level. It comes out about 70 MB at 192 kbps.
  • A phone video where the speech is quiet: +10 dB (about 2× as loud, by the rule of thumb), with the H.264 or HEVC picture copied as it is.
  • A podcast season whose episodes vary in level: up to 10 episodes at once, all evened out to Podcasts (−16 LUFS), so they play at the same loudness one after another.

Your files stay on your device

Your files aren't uploaded. The level is changed in your browser with a built-in audio encoder, so private recordings and unreleased songs don't wait in an upload queue or sit on a server.